- Need Help!- s1 MOTOR NOT CONTROLLABLE! HELP ME !
-
Registered
s1 MOTOR NOT CONTROLLABLE! HELP ME !
update! apparently the encoder motor is shot? any tips lol
the machine is a parpas diamond 5 axis, controller is heidenhain itnc530.
the A and the C axis are acting up meaning after every time i home the machine i have to re indicate both the 4+5th axis
and every time i turn on the machine everything goes great until the spindle turns on
when the spindle tries to start up the machine just shuts down altogether and i have to restart the process
i believe the encoder or the motor which drives it are fried or there is a loose wire or something
the parpas guy was messing around in the back trying to fix things last week, clearly he made 0 progress
how to i make the s1 motor reachable/controllable so the spindle will turn on ?!?!?!?!
Similar Threads:
Last edited by seeENseeGUY; 04-30-2018 at 11:37 AM.
Reason: update
-
- Need Help!- s1 MOTOR NOT CONTROLLABLE! HELP ME !
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules