CNC intarsia process?

Results 1 to 3 of 3

Thread: CNC intarsia process?

  1. #1
    *Registered User* merlin777's Avatar
    Join Date
    Jun 2018
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default CNC intarsia process?

    newbie question here. When you cut pieces for intarsia from a line drawing, how do you allow for the diameter of the tool so the pieces aren't too small?

    Similar Threads:


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    34529
    Downloads
    0
    Uploads
    0

    Default Re: CNC intarsia process?

    Offset the lines by 1/2 the tool diameter.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    *Registered User* merlin777's Avatar
    Join Date
    Jun 2018
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default Re: CNC intarsia process?

    how does it know which direction to offset then in? e.g. a circle?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

CNC intarsia process?

CNC intarsia process?

CNC intarsia process?