Getting close to finishing my large format 4 axis mill. three axis plus a rotary stage for cutting large foam sculptures.

Looking for recommendations on the best Mach 3 screen set.

Also, I'll be running five motors and drives for the machine (x axis has twin ball screws that will be slaved to run together.

I'm pretty good with Mach 3 and have some 4 axis experience but this is my first time slaving drives to run a single axis. I guess it would be nice if the display showed X,Y,Z,A but no big deal is the
DRO displays both drives on the X.

BTW, I'll be using a touch screen monitor if that matters.

Suggestions?

Thanks in advance.

Similar Threads: