How to reverse homing direction on Z axis? Mach4/ESS
Got my CNC router running great, but can't figure out how to get the Z axis to home upwards, or in the + direction.
When running in MDI, the Z axis moves in the proper direction, so the issue is only when homing.
I tried to find answers online, but they all pertain to Mach3, not Mach4.
Thanks.
Fixed !! found the homing direction under in Mach4 config-homing/soft limits-Home dir
Similar Threads:
Last edited by Danno; 01-09-2021 at 03:04 PM.
The one that dies with the most tools, WINS !
Reply with Quote
