Reply with QuoteChange the IJ mode in General Config.
Loading a different .xml file will change ALL of your Mach3 settings, so you'll likely need to manually change a lot of them to what you need them to be.
has any one seen this?
I load Mach3 default looks right box with 2 circles,
now I load XML file for my break out board its not right
what can i do???
Re: has any one seen this?
Change the IJ mode in General Config.
Loading a different .xml file will change ALL of your Mach3 settings, so you'll likely need to manually change a lot of them to what you need them to be.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Re: has any one seen this?
you got a gold star today it worked Changing the IJ mode in General Config. I was pulling my hair out Thanks!!
