Try another known good file and see what happens. And copy & paste the first few lines of the problem code into a post so we can take a look at it.
Please could someone assist me with this issue I've been having. One day my mach3 was working perfectly and then the next it just stops.
I can jog my machine without any issues. I can zero all axis etc. But when I press cycle start the gcode just hangs on the first line. No alarm msg next to the reset button either.
The gcode was working perfectly the previous day. Can't understand that it could be hardware otherwise I wouldn't be able to jog? I don't have limits installed and they are disabled.
Regards
Nic
Similar Threads:
Try another known good file and see what happens. And copy & paste the first few lines of the problem code into a post so we can take a look at it.
Jim Dawson
Sandy, Oregon, USA