Problem with mach 3 when using G00


Results 1 to 2 of 2

Thread: Problem with mach 3 when using G00

  1. #1
    Member
    Join Date
    Jan 2013
    Location
    egypt
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Problem with mach 3 when using G00

    Hello CNC geeks,

    I am facing a problem hen using rapid movement G00 with mach3, when I use it with Y-Axis, it always add 25 mm, for example if I want Y-Axis to 7 cm, the DRO gives 72.5 mm, if I move from machine home 10 cm using G00, the Y-Axis moves 102.5.

    Any Ideas?

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    4944
    Downloads
    0
    Uploads
    0

    Default Re: Problem with mach 3 when using G00

    It sounds like you've got the anti-backlash settings set wrong.

    Andrew Werby
    https://computersculpture.com/


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problem with mach 3 when using G00

Problem with mach 3 when using G00

Problem with mach 3 when using G00