We KNOW that Mach3 can do that, so I suspect your problem is backlash in the Y axis.
Cheers
Roger
We KNOW that Mach3 can do that, so I suspect your problem is backlash in the Y axis.
Cheers
Roger
Is this a homemade router you designed or a commercial built model? It could be a number of things, have you used it before and it was fine or is this your first project?
1000x750 Workbee CNC - Mach4 - PMDX USB - Windows 10 Pro
The first thing to do is to check the drawing as most fonts use sort straight lines,
Very good point! Especially if the original outlines were for a smaller size.
The thing to do would be to try carving a real circle, using G2/G3 commands.
Cheers
Roger