Mach3 Galil Plugin ver 4.6 problems with servo motors and encoders


Results 1 to 4 of 4

Thread: Mach3 Galil Plugin ver 4.6 problems with servo motors and encoders

  1. #1
    Member
    Join Date
    Jan 2007
    Location
    USA
    Posts
    87
    Downloads
    0
    Uploads
    0

    Default Mach3 Galil Plugin ver 4.6 problems with servo motors and encoders

    I have had problems with Galil plugin MP3 ver 4.6. It will not allow me to config a second time, and the DROs do not seem to be related to the servo motor encoders, rather they seem only to change on motion commands from Mach3. For example, sending a MDI command of G31 X1 F30 will change the X-DRO to 1.000 even with power disconnected from the motor, and thus no encoder movement. Manually turning the motor and encoder produces no change in the DROs.

    Ver 4.4 of the Galil MP3 plugin seems to work correctly.

    I have a copy of ver 4.4 that I will share.

    Similar Threads:


  2. #2
    Member
    Join Date
    Sep 2007
    Location
    lietuva
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Mach3 Galil Plugin ver 4.6 problems with servo motors and encoders

    My dmc 1830 not mapping axis with ver.4.6.Maybe you can send me ver. 4.4.To edit plugin a second time- before start Mach3 ,run galil smart terminal.



  3. #3
    Member
    Join Date
    Jan 2007
    Location
    USA
    Posts
    87
    Downloads
    0
    Uploads
    0

    Default Re: Mach3 Galil Plugin ver 4.6 problems with servo motors and encoders

    Quote Originally Posted by mutis View Post
    My dmc 1830 not mapping axis with ver.4.6.Maybe you can send me ver. 4.4.To edit plugin a second time- before start Mach3 ,run galil smart terminal.
    Be sure you only have one ver in the Mach3 folder or they will not work correctly. I cannot attach the file to this message from this website for some reason. Send me a private email at bbutcher85@yahoo.com and I will send it to you.
    Bob



  4. #4
    Member
    Join Date
    Sep 2007
    Location
    lietuva
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Mach3 Galil Plugin ver 4.6 problems with servo motors and encoders



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mach3 Galil Plugin ver 4.6 problems with servo motors and encoders

Mach3 Galil Plugin ver 4.6 problems with servo motors and encoders