Reply with QuoteInstall the patch from this thread, and Mach3 will work again.
https://www.cnczone.com/forums/mach-...ml#post2182022
Your motion controller will not work with any other software.
Mach3 won't start looking for alternative
So, with the last Windows 10 upgrade the Mach3 software has stopped working. Now I am looking for an alternative software. The only problem, is that I have a Mach3 Usb motion drive(Cheap aliexpress product, but perfect for me), and I don't know how to use that with an other program.
Similar Threads:
Re: Mach3 won't start looking for alternative
Install the patch from this thread, and Mach3 will work again.
https://www.cnczone.com/forums/mach-...ml#post2182022
Your motion controller will not work with any other software.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
