Does Mach even know where 'zero' is at that stage? I suspect not.
But having had poor results from a few tests, I LEARNT and do not use the GoToZero button.
Cheers
Roger
Hi,
I just bought a Chinese 3040USB 4 axis CNC. The problem is every time I press the go to zero button the program get FREEZE.
I cannot click anything. I have to End task the program to use it again. So I asked the seller but they cannot help me at all.
The mach3 version is 3.043.066 and the controller board is BL-USBMACH.
I also tried with Win7 x86 x64, Win8 and WinXP but the problem still goes the same.
I never used a CNC with the usbmach.dll plugin before.
But I've been using the 6040z which use the NcUsbPod.dll plugin and it works very well.
Here's the picture and XML file.
Similar Threads:
- Problem- SteelTailor machine is showing G92 error on screen while pressing start button.
- Need Help!- Can not go to home after pressing RESET button? ????
- FP3NC - bosch PC rebooting when pressing "ON" button
- Problem- Button and cursor freeze
- laser with MPC 6525 - laser blocks after pressing the START button
Does Mach even know where 'zero' is at that stage? I suspect not.
But having had poor results from a few tests, I LEARNT and do not use the GoToZero button.
Cheers
Roger
You do know you can download the real official Mach3 and try it out for FREE?
Go for the 0.062 version, not the final release of 0.066.
There is a 500 line limit and there may be one or two functions which do not work, like lathe threading, but those are spelt out.
Cheers
Roger
Thank you for the information everyone. I'll try the official one and then report ASAP.
Be sure to run it in demo mode, and not with the pirated license file.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I try the Mach3 Demo but it not work again. It's like I'm missing something. So I found this BL-UsbMach-V22.dll on the internet. Then I use this instead of UsbMach.dll and it's work!!!
Thanks everyone again.
Cheers