I am using BOBCAD V30. Have used the MACH post processor successfully for years on multiple machines. We just moved our INC CNC machine. The desk top crapped out and we loaded a Demo of Mach 3 onto a laptop to run the machine. Exactly what we had in it previously. Now it is stopping when it comes to a Sub Program call up and the machine just sits and waits. Did I overlook a setting or is the Demo not allowing it? Thank you in advance.
Similar Threads:
I think subs don't work in the demo.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
If you can access the HDD of your dead desktop, copy the Mach1Lic.dat from Mach3 directory to the laptop, same directory.
That is your license file. Keep a copy of the file in safe place for future
Make no mistake between my personality and my attitude.
My personality is who I am. My attitude depends on who you are.
Thank you everyone for your advice. I found the DAT file in the old desk top and was able to move it over. The issue was the 500 line limit. The sub was beyond the 500 line limit and when it was called up, MACH just drew a blank. Once I got the DAT file moved, everything worked. Thank you again for the help