Need help with setting parameters on Output #1


Results 1 to 6 of 6

Thread: Need help with setting parameters on Output #1

  1. #1
    Member
    Join Date
    Nov 2010
    Location
    Asia
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Need help with setting parameters on Output #1

    I have a MKS4-V board made by a chinese company called Cheng du Xing Cheng Technology Co. LTD. I have connected the 6 wires for controlling the spindle. It can control the spindle using the VFD panel control including the rpm. But I cannot control the spindle using Mach3. The spindle has no response when I click Spindle Cw F5 button on Mach 3 BUT the VFD fan turns on.

    VFD model is MK100-2S1.5G-DK it's a 1.5kw made by a company called Nangtong Hui Automation Equipment Technology Co. Ltd.

    Laptop is a 32 bit Windows 7

    It could be some numbers in Configuration - ports and pins- output signals -- Output #1 (port# 1, pin # 14) incorrect.

    Any help would be appreciated.

    Regards
    Lasercut

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Need help with setting parameters on Output #1-15936780601101865053167-jpg   Need help with setting parameters on Output #1-1593677703805-825873404-jpg   Need help with setting parameters on Output #1-photogrid_1593677618736-jpg  


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1566
    Downloads
    5
    Uploads
    2

    Default Re: Need help with setting parameters on Output #1

    ...VFD settings maybe need changed. Found a manual via linuxcnc user may help you.
    https://onedrive.live.com/?authkey=%...%21114&o=OneUp

    DJ



  3. #3
    Member
    Join Date
    Nov 2010
    Location
    Asia
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by machinehop5 View Post
    ...VFD settings maybe need changed. Found a manual via linuxcnc user may help you.
    https://onedrive.live.com/?authkey=%...%21114&o=OneUp


    DJ
    I have this exact manual and already setup the parameters on the VFD as well but spindle is still not turning via Mach3. What numbers in the Output signal should I key in for port and pins? Anyone?



  4. #4
    Member
    Join Date
    Nov 2010
    Location
    Asia
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Need help with setting parameters on Output #1

    Ok it's solved. Thanks



  5. #5
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1566
    Downloads
    5
    Uploads
    2

    Default Re: Need help with setting parameters on Output #1

    Quote Originally Posted by lazercut View Post
    Ok it's solved. Thanks
    ...great. What was the problem?



  6. #6
    Member
    Join Date
    Nov 2010
    Location
    Asia
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Need help with setting parameters on Output #1

    The problem was I have not key in the Spindle speed for the motor.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help with setting parameters on Output #1

Need help with setting parameters on Output #1