Has anyone had issues with having to calibrate an OMNI CNC router? The machine came with the default units set to mm and I am aware that users are not supposed to change the units under ‘select native units’. I work in inches so I changed from mm to inches on the Settings screen. That’s not necessarily relevant I guess but my problem is that when I jog using a 1 inch step the DRO reads that it moved 1 inch but it moves more like 5 or 6 inches. The link I provide below seems to address this issue around 7 minutes, but before I start altering factory settings and attempt to calibrate anything I wanted to ask if this is the route I should take. To my knowledge OMNI has already done the calibration and configuring of everything so I’m worried to start changing these settings. Any advice would be much appreciated.



Thanks

Similar Threads: