Problem Z Axis won't Jog both directions


Results 1 to 1 of 1

Thread: Z Axis won't Jog both directions

  1. 05-07-2019, 08:54 PM #1
    Naces2112
    Naces2112 is offline
    Member Naces2112's Avatar
    Join Date
    May 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Z Axis won't Jog both directions

    This is my 3rd machine build with Mach3. New machine is a 48x48 scratch built running Mach3 and a USB Motion Card from China.
    Has been running great for 3 weeks, then I cannot Jog Z Axis in both directions.
    I swapped the 3-wire connections from the control board out, Z and X Axis's. Everything works fine.
    Swapped them back, no Z- Jog. Anyone heard of this ?

    Craig

    Similar Threads:
    Attached Files Attached Files
    Reply with Quote Reply with Quote Posted via Mobile Device   

« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules



About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Quick Links

Follow us on


Our Brands

Z Axis won't Jog both directions

Z Axis won't Jog both directions