The problem with threading Mach3 Turn on CNC turning


Results 1 to 5 of 5

Thread: The problem with threading Mach3 Turn on CNC turning

  1. #1
    Activation process Actor28's Avatar
    Join Date
    Dec 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default The problem with threading Mach3 Turn on CNC turning

    Hello!

    The problem with Mach3 Turn - does not display the actual spindle speed (S True) of the turning CNC. The signal from the sensor on the spindle comes to the board, and even Mach3 sees it (the index blinks on the diagnostics tab in the Mach3 lathe), but the speed does not show as if there is no sensor. I tried to put different sensors - hall, reed switch, induction - the result is one.

    Recorded video - the essence of the problem is revealed - see:

    The purpose of the idea is to cut the threads on a lathe from Mach3 Turn.
    Spindle rotation speed: 200-2000 rpm. Real speed does not show either the minimum speed or the maximum.
    The machine is homemade.


    I also attach a file with settings: https://drive.google.com/open?id=1_x...N1rytmD69GXwm-
    And screenshots of settings.

    Thanks in advance! Glad any help!

    Similar Threads:
    Attached Thumbnails Attached Thumbnails The problem with threading Mach3 Turn on CNC turning-5-jpg   The problem with threading Mach3 Turn on CNC turning-1-jpg   The problem with threading Mach3 Turn on CNC turning-2-jpg   The problem with threading Mach3 Turn on CNC turning-3-jpg  

    The problem with threading Mach3 Turn on CNC turning-4-jpg   The problem with threading Mach3 Turn on CNC turning-turn-option-jpg  


  2. #2
    Member
    Join Date
    Apr 2014
    Posts
    215
    Downloads
    27
    Uploads
    0

    Default

    Why have you enabled encoder 1 AND index on the same port + pin?



  3. #3
    Member
    Join Date
    Apr 2014
    Posts
    215
    Downloads
    27
    Uploads
    0

    Default

    Check out page 43 here



    https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.machsupport.com/wp-content/uploads/2013/02/Mach3_Threading.pdf&ved=2ahUKEwjR19Og2KffAhXKyqQKH dzgDNgQFjAAegQIARAB&usg=AOvVaw3rf1Z4N_9dSDgWwaTq10 eJ&cshid=1545078196994



  4. #4
    Member
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    4252
    Downloads
    4
    Uploads
    0

    Default Re: The problem with threading Mach3 Turn on CNC turning

    The problem with Mach3 Turn - does not display the actual spindle speed (S True) of the turning CNC.
    It does - provided you have allocated the pins correctly.

    Cheers
    Roger



  5. #5
    Member Mecanix's Avatar
    Join Date
    Aug 2019
    Posts
    339
    Downloads
    0
    Uploads
    0

    Default Re: The problem with threading Mach3 Turn on CNC turning

    You need to turn ON the spindle via the MDI first. Example: S500 M3 <enter>
    Then your pulse will be read by MACH3.

    edit: and I've just noticed I'm replying to OP on a thread started a millennium ago :/ oops



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

The problem with threading Mach3 Turn on CNC turning

The problem with threading Mach3 Turn on CNC turning