Mach 4 reinstall preview issue

[Gary-Wiant]

I had a computer issue & had to reinstall Mach 4 for my Avid CNC Pro router, everything works fine now but the preview on the right is very hard to see, the lines that show my part, the current X-Y location & cutting boarders. It is like the lines need to be thicker.

Thanks for your help in advance
Gary

Similar Threads:

• Mach issue
• Weird Mach issue
• Newbie- Cambam issue or Mach 3 Issue??
• First preview of Renishaw’s exhibits at MACH 2010
• Mach issue with my mill

[joeavaerage]

Hi,
the ToolPath Pane is zoomable. Have you tried to do so? Sometimes a refresh on the Toolpath tab or disengaging the travel limits view feature will allow Mach to
more appropriately zoom and dsiplay the toolpath.

Craig

[Gary-Wiant]

Hi,
the ToolPath Pane is zoomable. Have you tried to do so? Sometimes a refresh on the Toolpath tab or disengaging the travel limits view feature will allow Mach to
more appropriately zoom and dsiplay the toolpath.

Craig

The width of the line doesn't change much based on zoom level. I'll check the toolpath tab next week when I'm back in the shop.

Thank you
Gary

[burystreak]

The width of the line varies little depending on the zoom level. When I return to the store next week, I'll check the toolpath tab. slime rancher 2