What the hell is your problem dude? Ask Hoss, he's commented on my videos and helped me out, check out reprap forums, you will see me there. I have nothing to prove over internet to a troll like you who follows people around doing exactly as you are now. Look up why to change from .5mm to .4mm in slicer, its all out there but it takes a person with better pc skills than you have it seems... Please quit hyjacking threads for your own amusement, nobody cares what you have to say.
Hi CNCadmin,
Great to hear! Do you have any new photo's you can show of the successfull print? I would be interested in seeing them.
If you have any questions or comments, please feel free to ask.
Best Regards,
Jon Fye
Sales Associate
jon@lulzbot.com
1-970-377-1111 x633
Aleph Objects, Inc.
123 SW 12th Street
Loveland, Colorado 80537
United States of America
I need another one. I have many parts I need to print.
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
Hi CNCadmin,
You need another one of?
If you have any questions or comments, please feel free to ask.
Best Regards,
Jon Fye
Sales Associate
jon@lulzbot.com
1-970-377-1111 x633
Aleph Objects, Inc.
123 SW 12th Street
Loveland, Colorado 80537
United States of America
Hi CNCadmin,
Oh you mean you need another printer! I would be happy to sell you another one if you like.
If you have any questions or comments, please feel free to ask.
Best Regards,
Jon Fye
Sales Associate
jon@lulzbot.com
1-970-377-1111 x633
Aleph Objects, Inc.
123 SW 12th Street
Loveland, Colorado 80537
United States of America
hmmm, more lies. i checked out your youtube page, no videos there on 3d printing and no comments by a hoss. did read this comment left for you, "Hey, you got to come back to the forum, You'll piss off some moderators..." seems you have a problem.
I deleted them after I sold my printer as most of them were problems I had to overcome, but that's cool you care so much to look at my account, that or your a stalker..... Scary...
*everyone* If your comments do not pertain to the OP, then please take your irrelevant discussions to another thread or I will ask CNCadmin to lock this thread and remove all unrelated posts.
I expect this section to remain civilized and on topic. If you wish to pursue tangents and engage in ad-hominem personal attacks against one another then please do it in another section/thread. That is all.
Sorry that I have not gotten back to this tread but I have since than corrected the printing issues seams i was not running the head hot enough.
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]