video #2 assembly of the parts for a sail boat, drawing the bottom panels
from boat builders handbook 1950 a speedy 14 foot international dingy class sailer
I am going to digitize all the full sized diagrams and cut the parts on a cnc machine
I also will show the assembly on video #2
beam 5 feet
weight 165 lbs
depth amidships 21 in
depth at bow 21 in
depth at transom 16 in
sail area 125 sq feet
seating 2 adults cruising 3 adults
Similar Threads:
Last edited by woodman08; 08-30-2020 at 11:55 AM.
Re: video #2 assembly of the parts for a sail boat, drawing the bottom panels
Looks nice!
What is the class or name?
I have built a few sail boats, dinghy's, cedar strip canoe and water-ski boat.
The small dinghy's were plywood panels 'sewn' together with copper wire and covered with fibre glass cloth and fibre glass resin
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Re: video #2 assembly of the parts for a sail boat, drawing the bottom panels
its a zephyr international dingy class #287 from a 1950 book of boats, wish you were closer to me as you could finish it off
Reply with Quote
