Need Help! XHC WHB04B-4 pendant


Results 1 to 3 of 3

Thread: XHC WHB04B-4 pendant

  1. #1
    Member
    Join Date
    Mar 2005
    Location
    Canada
    Posts
    271
    Downloads
    0
    Uploads
    0

    Default XHC WHB04B-4 pendant

    I'm going to purchase an XHC WHB04B-4 pendant, but I can only find them from China, just wondering if anyone has bought one from anywhere else or recommend a good dealer from China I can count on.
    Thanks Mike

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2013
    Posts
    4280
    Downloads
    0
    Uploads
    0

    Default Re: XHC WHB04B-4 pendant

    Hi,
    XHC have a poor reputation for supporting their devices. They have a plugin for Mach3 but to my knowledge not for LinuxCNC,
    are you sure that it would work with your setup?

    It may mean that you'll have t write your own plugin and probably with little or no support from XHC.

    Craig



  3. #3
    Member
    Join Date
    May 2015
    Location
    Australia
    Posts
    684
    Downloads
    0
    Uploads
    0

    Default Re: XHC WHB04B-4 pendant

    There is driver support in linuxcnc for your model XHC-HB04
    And for the newer version XHCâ??WHB04Bâ??6
    I can't comment on either.

    XCH actually make some higher quality commercial pendants which are nice and what I use but they consume a lot of pins if fully configured (I have on Mesa hardware)

    Rod Webster
    www.vmn.com.au


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

XHC WHB04B-4 pendant

XHC WHB04B-4 pendant