LINUXCNC weird program issue


Results 1 to 1 of 1

Thread: LINUXCNC weird program issue

  1. #1
    Member logan224's Avatar
    Join Date
    Nov 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default LINUXCNC weird program issue

    I am trying to run a program and when it calls up tool 12 it doesn't seem to do what it's supposed to. The preview on Linuxcnc shows the tool in one spot but the tool is actually in a different spot. i do not have this problem with any other tool paths in the program. When I separate the toolpath into its own program it goes to a different location. The code between the to programs is the same I dont understand why it is doing this any help would be appreciated.

    Similar Threads:
    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

LINUXCNC weird program issue

LINUXCNC weird program issue

LINUXCNC weird program issue