Schneeberger absolute linear encoders with LinuxCNC/Mesa boards


Results 1 to 2 of 2

Thread: Schneeberger absolute linear encoders with LinuxCNC/Mesa boards

  1. #1
    MHilligsoe's Avatar
    Join Date
    Mar 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Schneeberger absolute linear encoders with LinuxCNC/Mesa boards

    Hi,
    I'm building a custom CNC mill, and would like to use Schneeberger linear rails with absolute encoder together with LinuxCNC+Mesa boards (e.g. 7I44 or 7I47).
    I've gotten a quote for the following encoder configuration, and would like to ask if anybody can see any issues with this combination:

    1 x AMSABS 4B S 30 -N -G2 -KC -R11 -1198 -39 -39 -CN -TA1
    1 x AMSABS 4B W 30 -C -P3-G2 -V3 -R2-CN-S22-LV-TMH-TB1

    Encoder configuration:

    TSS cycle synchronous serial interface(SSI)
    29 Bit code length
    0-26 Position bits
    27 warn bit
    28 error bit
    32µs timeout (break between sending measuring data)
    Binary encoding
    0,78µm resolution

    I haven't used LinuxCNC with absolute encoders before, so I'm worried that I end up with a combination that won't work togehter.



  2. #2
    Member
    Join Date
    Feb 2008
    Location
    USA
    Posts
    587
    Downloads
    0
    Uploads
    0

    Default Re: Schneeberger absolute linear encoders with LinuxCNC/Mesa boards

    Should not be an issue, We have a number of customers using SSI encoders for a few years now.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Schneeberger absolute linear encoders with LinuxCNC/Mesa boards

Schneeberger absolute linear encoders with LinuxCNC/Mesa boards

Schneeberger absolute linear encoders with LinuxCNC/Mesa boards