I bought a 6040 4 axis cnc off ebay and it arived around 5 weeks ago and I have yet to get it running. I tried mach3 on 3 different computers and never could get it working. I tried linuxcnc and got it moving within about 30 minutes but I'm trying to get the motors tuned properly. What I'm stuck at right now is micro stepping. I've looked at my drivers (TX14207) and there are 7 dip switches. 3,4,5,7 are on on the A axis (can't remember the others. A axis was the last one I worked on last night). When I test the axis and tell it to move 15mm, it moves more like 40mm. I can't seem to find any documentation on these drivers. Does any one know what the micro stepping should be set to or how I can find out this information?

Sorry if this has been answered somewhere else. I have been searching a lot on here and google but haven't found anything yet.

This is the mill I bought:
https://www.ebay.com/itm/1-5KW-VFD-4...53.m1438.l2649

Similar Threads: