Need Help! CNC Rebuild


Results 1 to 3 of 3

Thread: CNC Rebuild

  1. #1
    Member
    Join Date
    Aug 2014
    Location
    USA
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default CNC Rebuild

    I am in the process of rebuilding a 4x8 K2 CNC that has been abused. I bought it at an auction and it must have been out in the weather for about a year. All of the aluminum is perfect but electronics are gone. This has totally destroyed the linear rails. I am looking for replacements and the numbers on the bearings do not seem to help. Any help on information on them and where to get new rails would help.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails CNC Rebuild-20210129_163052-jpg  


  2. #2
    Member
    Join Date
    May 2016
    Location
    United States
    Posts
    316
    Downloads
    0
    Uploads
    0

    Default Re: CNC Rebuild

    Lintech Motion makes an "HRC" profile rail series. Have a look at their site and compare dimensions, might be the ticket.



  3. #3
    Member gio666's Avatar
    Join Date
    May 2008
    Location
    Canada
    Posts
    4068
    Downloads
    0
    Uploads
    0

    Default Re: CNC Rebuild

    ou can take Measurement rail from the bottom to top of the block and width of the rail, hole spacing on the block, and use any brand rails all have the same bolt pattern 60mm spacing

    XZero cnc


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

CNC Rebuild

CNC Rebuild