- New Machine Build- MX4660 with UC100 and UCCNC. Need help with output 1
-
Member
MX4660 with UC100 and UCCNC. Need help with output 1
Hello Everyone.
I am building my first CNC Plasma table. I am using MX4660 with UC100 and UCCNC software.
I am currently trying to wire in a 12v relay, I have it wired as follows.
power supply 12V + to Relay coil +
Relay coil - to MX4660 Output 1 +
MX4660 Output 1 - to power supply 12V -
(I have also tried wiring backwards.)
In UCCNC I have configured spindle M3 Relay to PIN 17 PORT 1.
According to everything I read when I press the torch "ON" button in UCCNC the 12v relay should trigger and close the loop between Pin 3 & 4 on the plasma cutter triggering the torch.
However the 12V relay is not closing.
What could I be doing wrong here?
Am I missing anything?
Thank you all in advance.
Similar Threads:
-
-
Member
Re: MX4660 with UC100 and UCCNC. Need help with output 1
Hello, this is Jason Peng from Leadshine, It seems I had replied your this problem by email,please check. thanks.
- New Machine Build- MX4660 with UC100 and UCCNC. Need help with output 1
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules