Hi UWe,
did you get any reply from ACT?
I'm in the same situation, the HBS86H driver from ACT has a couple of pins ( z+/z-) that the leadshine does not have.
I would appreciate your help
cheers
Giorgio
Is anybody using the black HBS86H from 'Act-Motor' instead of the metallic blue one from Leadshine ???
At first I thought there was no difference but when I started with the wiring of the encoder feedback connector, I found that the order of pins is different.
pin1 : PB- (act-motor) , EB+ (leadhshine)
pin2 : PB+ (act-motor) , EB- (leadhshine)
pin3 : PA- (act-motor) , EA+ (leadhshine)
pin4 : PA+ (act-motor) , EA- (leadhshine)
Now I am not sure, if I can trust the white printing on the case and which wire to connect to which pin.
I contacted ActMotor but due to chinese holidays, they are not able to answer right now. So maybe somebody is out there who is using the same driver with Nema34.
Thanks
Uwe
Similar Threads:
Hi UWe,
did you get any reply from ACT?
I'm in the same situation, the HBS86H driver from ACT has a couple of pins ( z+/z-) that the leadshine does not have.
I would appreciate your help
cheers
Giorgio