Leadshine ES-DH1208 faults wtih ER020 frequently - Page 2

Page 2 of 2 FirstFirst 12
Results 21 to 22 of 22

Thread: Leadshine ES-DH1208 faults wtih ER020 frequently

  1. #21
    Member
    Join Date
    May 2015
    Location
    China
    Posts
    38
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine ES-DH1208 faults wtih ER020 frequently

    Hi Ron,
    Thank you for your attention on Leadshine products.
    Err020 means position following error. Our default setting is 1000 pulses in the software. If the error value of encoder feedback exceeds 1000, Err020 will be generated. ER020 frequently, could you please check encoder cable if it's loose(bad connection) or too high acceleration. By the way, what motor model do you use ?I need to check if its Leadshine motor and encoder resolution.



  2. #22
    Member
    Join Date
    May 2015
    Location
    China
    Posts
    38
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine ES-DH1208 faults wtih ER020 frequently

    First of all, I'd like to know what model of new motor you have changed? If you have used Leadshine encoder extension cable ? I think there are some problem with encoder signal transmiting between your new motor and ES-DH1208.



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Leadshine ES-DH1208 faults wtih ER020 frequently

Leadshine ES-DH1208 faults wtih ER020 frequently