- Leadshine ES-DH1208 faults wtih ER020 frequently
-
Member
Re: Leadshine ES-DH1208 faults wtih ER020 frequently
Hi Ron,
Thank you for your attention on Leadshine products.
Err020 means position following error. Our default setting is 1000 pulses in the software. If the error value of encoder feedback exceeds 1000, Err020 will be generated. ER020 frequently, could you please check encoder cable if it's loose(bad connection) or too high acceleration. By the way, what motor model do you use ?I need to check if its Leadshine motor and encoder resolution.
-
-
Member
Re: Leadshine ES-DH1208 faults wtih ER020 frequently
First of all, I'd like to know what model of new motor you have changed? If you have used Leadshine encoder extension cable ? I think there are some problem with encoder signal transmiting between your new motor and ES-DH1208.
- Leadshine ES-DH1208 faults wtih ER020 frequently
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules