File size limit for RD6442S control system?

Results 1 to 2 of 2

Thread: File size limit for RD6442S control system?

  1. #1
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default File size limit for RD6442S control system?

    Hello everyone. I am brand new to the group and recently purchased a 60w Unich 1318 cnc laser. I am having a few problems that I can't seem to figure out.
    The first problem is that the lighter areas of photos are very faint regardless of the medium. I have tried different power levels and speeds, even lightening up the photo in both corel and photograv, but nothing helps.
    What I've tried so far is speeds between 200mm-300mm sec and power levels from 17-26% min with max set the same. I was able to successfully engrave these files on a different laser that of course had a different control card and software.
    The second issue is with large files. The laser bed is 51"x 71" yet I can't engrave a 24"x48" photo. Is there a file size limitation with the RD controllers?
    As you may know, tech support is not much help, any advice you can provide to help get this machine working properly will be greatly appreciated. Thanks in advance!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: File size limit for RD6442S control system?

    Turns out there is a file size limit. My file was 102mb I had to make it smaller and it worked out



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

File size limit for  RD6442S control system?

File size limit for  RD6442S control system?

File size limit for  RD6442S control system?