Best software for 200mW red laser engraving CNC

Results 1 to 2 of 2

Thread: Best software for 200mW red laser engraving CNC

  1. #1
    Registered
    Join Date
    Apr 2015
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Best software for 200mW red laser engraving CNC

    I have buy my 1st CNC laser engraving machine with 200mW red laser with 17*20 cm of working area.

    I have get LITE FIRE LASER who is working great, but this version is limited to 38*38 mm

    I also tested Grbl Controller and it looks very impressive, but does not do the job. Lines are to thin / narrow. Engraved material does not look good.
    (Should I check laser and tighten the nut or something ?)

    What is best, simple software for newbies you recommend ?


    Thank you

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2015
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Best software for 200mW red laser engraving CNC

    Any advice please?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Best software for 200mW red laser engraving CNC

Best software for 200mW red laser engraving CNC

Best software for 200mW red laser engraving CNC