Best software for 200mW red laser engraving CNC


Results 1 to 2 of 2

Thread: Best software for 200mW red laser engraving CNC

  1. #1
    Registered
    Join Date
    Apr 2015
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Best software for 200mW red laser engraving CNC

    I have buy my 1st CNC laser engraving machine with 200mW red laser with 17*20 cm of working area.

    I have get LITE FIRE LASER who is working great, but this version is limited to 38*38 mm

    I also tested Grbl Controller and it looks very impressive, but does not do the job. Lines are to thin / narrow. Engraved material does not look good.
    (Should I check laser and tighten the nut or something ?)

    What is best, simple software for newbies you recommend ?


    Thank you

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2015
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Best software for 200mW red laser engraving CNC

    Any advice please?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Best software for 200mW red laser engraving CNC

Best software for 200mW red laser engraving CNC