Firstly I've windows xp and have Laser Cut 5.3 Mpc6515 it was working properly, But know I Upgraded my Windows to 7 and installed LAser Cut 5.3, But the Problem is The layout size Becomes 1200x900 mm, Before it was 1800*1200, I tried opening .bat files in the laser Cut 5.3 folder which is as below, But Couldn't change the file to 1800*1200 as my machine bed is 1800*1200 but now my machine is working only on 1200*900mm, Can anybody help me in getting 1800*1200 size again.
Lasercut 5.3 – Blacknose
Lasercut 5.3 – Greyfin
Lasercut 5.3 – Silvertail
Lasercut 5.3 – Whitetooth

Similar Threads: