- Need Help!- lasercut - finished product 20% smaller than in software?
-
Member
lasercut - finished product 20% smaller than in software?
All right,so i've set up my laser to cut a 50x50 mm square.
The final result is 40x40 mm square. 20% less than it's set up in LaserCut53.
The laser is a g weike 3040, and i'm not able to connect to it via USB for now. All jobs are produced as .mol files to usb memory.
Anyone have any ideas what might cause this?
Similar Threads:
-
-
Re: lasercut - finished product 20% smaller than in software?
my machine is also doing the same. still looking for a solution
-
Member
Re: lasercut - finished product 20% smaller than in software?
Awesome to hear that i'm not alone.
I'm attaching the settings i have in LaserCut53. I guess that the error is here somewhere.
-
Member
Re: lasercut - finished product 20% smaller than in software?
Greetings!@ I don't have this machine so this is speculation. My guess is the Pulse Unit value for the X and Y axis is the travel per pulse. You might see if the ellipsis next to each value opens up a pull down. If so, look for something along the lines of 0.00625 or thereabouts. If not, see if you can enter that value into the field. Just swagging around 20 percent less than the current value. You'll probably get something closer to what you want if my guess is right about the contents of this value, it sounds like the machine is generating too few step pulses for a given travel distance.
-
Member
-
Member
hi,
I did what you proposed, and Remove 20% of each of the two Numbers,
It now gives me the right output!
Thanks!
I’ll dig around a little to see if i understand why X and Y values differ.
- Need Help!- lasercut - finished product 20% smaller than in software?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules