- Problem- LaserCut 5.1 - Datum position setting
-
*Registered User*
LaserCut 5.1 - Datum position setting
Hi guys,
new to this forum, was reading it a bit, can't find the solution, so here's my topic.
We have some old chinese laser cutting machine, operated with LaserCut 5.1 software. It does the job, but not so well as we want.
The only problem we have is that the Auto-Datum. We want simply make new 0,0 (don't care so much about the Z-axis) for the laser. But every time we try to hit the Datum button, the laser will travel to the back and hit the back wall. So the Datum is probably set beyond the cutting plate.
Can we somehow manage to make new Datum or simply say to the laser to move to for example 10,30 manually?
Thanks, any help is appreciated
Similar Threads:
-
- Problem- LaserCut 5.1 - Datum position setting
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules