Connecting a laser power supply to a new drive board

Results 1 to 2 of 2

Thread: Connecting a laser power supply to a new drive board

  1. #1
    Registered
    Join Date
    Feb 2006
    Location
    UK
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Connecting a laser power supply to a new drive board

    Hello everybody
    A number of years ago I built a lasersaur, but the driveboard has now packed up and I don't have the soldering skills to make another one so I have bought my self an Openbuilds Blackbox motion controller.

    I have everything moving and homing again, but electrical stuff isn't my strong point and I need help connecting the laser power supply up the the Blackbox and chiller. I have drawn and attached a diagram which I hope explains what I want to do. Could somebody please tell me where each wire should go.
    Thanks In advance
    Aaron



  2. #2
    Member Algirdas's Avatar
    Join Date
    Mar 2009
    Location
    United Arab Emirates
    Posts
    1982
    Downloads
    2
    Uploads
    0

    Default Re: Connecting a laser power supply to a new drive board

    Don't see any attachment . . .



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Connecting a laser power supply to a new drive board

Connecting a laser power supply to a new drive board