- 4 burn marks on a newly replaced laser...
-
Member
4 burn marks on a newly replaced laser...
Hello,
I was just looking to see if someone could confirm what I think is the issue with my machine.
I'm not a beginner with laser cutting but by no means an expert. I have changed my laser cutter tube a couple of times myself before and have had 2 machines before.
I just ordered a new tube which I had to get from a chinese supplier, however i did it through amazon instead of a different platform.
I installed the tube and everthingseemed fine, however within a couple of days cutting I am now getting 4 burn marks.
I have attached an image of the masking tape from various points around the machine.
I saw on one forum that this means the tube is dead.
So I am enquiring wether anyone on here would agree that this is the case?
Just waiting for a response from my supplier but I assume it will take a day or so.
Thank you
Amy
Similar Threads:
-
- 4 burn marks on a newly replaced laser...
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules