Tube and power supply upgrade

Results 1 to 2 of 2

Thread: Tube and power supply upgrade

  1. #1
    Member
    Join Date
    Dec 2006
    Location
    Italy
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Tube and power supply upgrade

    Hi all,
    my 80W laser tube failing (the cooling water go everywere in the tube, also in the inner tube), so I bought this 2 product:
    https://www.vevor.com/collections/la...utting-machine
    https://www.vevor.com/products/150w-...106f6cd7&_ss=r

    I choose a bigger power supply to future upgrading. But now I notice that the laser tube need 26KV, instead power supply voltage output is 34KV.
    I understood that the output power is adjust with current set from controller, but how can I set the voltage? Or the voltage is
    proportional to current?

    Thank you for your support.

    By(t)e

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2006
    Location
    Italy
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Tube and power supply upgrade

    I answer to myself.
    Vevor (laser tube and power supply vendor) told me that the power supply auto-set the voltage to correct value.
    Anyway, today the tube arrived and I put in my machine with original power supply (80W 40kV). All work correctly (I think: the beam out from tube). I must align the mirrors and make an extension for tube coverage.

    By(t)e



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tube and power supply upgrade

Tube and power supply upgrade