Laserpro Explorer II - Error Code 000 IVT: 30000000

Results 1 to 3 of 3

Thread: Laserpro Explorer II - Error Code 000 IVT: 30000000

  1. #1
    shanephoward's Avatar
    Join Date
    Jan 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Laserpro Explorer II - Error Code 000 IVT: 30000000

    Hello all,
    I am getting the Error Code 000 IVT: 30000000 everytime I turn my Explorer II on now.
    I was doing some cutting one day and left machine on at night and it went into standby mode.
    The next day I came out to cut and pushed button to wake it up and it was locked up.
    I powered the machine down and turned back on and now get this code.
    I have pulled the power and let it sit but still same error. I cant really find any info on the code and needing some help to move in the right direction to fix it.
    Thanks in advance
    Shane



  2. #2
    Member MICHELLEKOLLAR's Avatar
    Join Date
    Nov 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Exclamation Re: Laserpro Explorer II - Error Code 000 IVT: 30000000

    Quote Originally Posted by shanephoward View Post
    Hello all,
    I am getting the Error Code 000 IVT: 30000000 everytime I turn my Explorer II on now.
    I was doing some cutting one day and left machine on at night and it went into standby mode.
    The next day I came out to cut and pushed button to wake it up and it was locked up.
    I powered the machine down and turned back on and now get this code.
    I have pulled the power and let it sit but still same error. I cant really find any info on the code and needing some help to move in the right direction to fix it.
    Thanks in advance
    Shane
    Hi Shane,

    I'm having this problem right now! Did you ever find an answer?

    Thanks,
    Michelle



  3. #3
    Member 77hippiechild's Avatar
    Join Date
    Nov 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Laserpro Explorer II - Error Code 000 IVT: 30000000

    Quote Originally Posted by MICHELLEKOLLAR View Post
    Hi Shane,

    I'm having this problem right now! Did you ever find an answer?

    Thanks,
    Michelle
    Has anyone ever figured this out? I am totally brand new and just fired up a used machine. It was working when I purchased it and then we loaded it and took it back to our shop. It has set there for about 2 years before we finally got the electric in and ready to roll



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Laserpro Explorer II - Error Code 000 IVT: 30000000

Laserpro Explorer II - Error Code 000 IVT: 30000000