CW-5200 not cooling

Results 1 to 2 of 2

Thread: CW-5200 not cooling

  1. #1
    Jackson4911's Avatar
    Join Date
    Nov 2019
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default CW-5200 not cooling

    Good evening all!

    Just a short question in case anyone else has faced the same problem,

    Chiller powers up and looks fine, however it doesn’t cool down the water at all! Once turned on the water slowly heats up.

    I’ve tried a few test pieces with the ambient temp been around 24, the water temp climbs up to mid 30’s and sets off the E2

    Any help would be greatly appreciated!

    Many thanks Jacko

    Similar Threads:


  2. #2
    Member Tyler2981's Avatar
    Join Date
    Nov 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Jackson4911 View Post
    Good evening all!

    Just a short question in case anyone else has faced the same problem,

    Chiller powers up and looks fine, however it doesn’t cool down the water at all! Once turned on the water slowly heats up.

    I’ve tried a few test pieces with the ambient temp been around 24, the water temp climbs up to mid 30’s and sets off the E2

    Any help would be greatly appreciated!

    Many thanks Jacko



    I'm having this same issue, did you ever find an answer. Was working fine for first couple weeks, now it won't get cool enough, and it heats up super fast. Although the copper pipes feel cool to the touch, the compressor gets pretty hot though



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

CW-5200 not cooling

CW-5200 not cooling