Good evening all!
Just a short question in case anyone else has faced the same problem,
Chiller powers up and looks fine, however it doesn’t cool down the water at all! Once turned on the water slowly heats up.
I’ve tried a few test pieces with the ambient temp been around 24, the water temp climbs up to mid 30’s and sets off the E2
Any help would be greatly appreciated!
Many thanks Jacko
Similar Threads:
Good evening all!
Just a short question in case anyone else has faced the same problem,
Chiller powers up and looks fine, however it doesn’t cool down the water at all! Once turned on the water slowly heats up.
I’ve tried a few test pieces with the ambient temp been around 24, the water temp climbs up to mid 30’s and sets off the E2
Any help would be greatly appreciated!
Many thanks Jacko
I'm having this same issue, did you ever find an answer. Was working fine for first couple weeks, now it won't get cool enough, and it heats up super fast. Although the copper pipes feel cool to the touch, the compressor gets pretty hot though