Trying to compile Grbl esp-32 Barton Dring and failing


Results 1 to 3 of 3

Thread: Trying to compile Grbl esp-32 Barton Dring and failing

  1. #1
    Member Redeemed's Avatar
    Join Date
    Oct 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Trying to compile Grbl esp-32 Barton Dring and failing

    Hi, hopefully someone will be able to help me out here. I've tried on the Espressif forums and had no luck, similarly on GitHub.
    I came across this site :https://embeddedtronicsblog.wordpres...10/esp32-grbl/
    and followed the instructions explicitly - couldn't get it to compile.

    I tried similar tutorials on Youtube and a common factor seems to be the need for the file 'FreeRTOS.h".

    I tracked down the code for FreeRTOS.h, or so I thought, pasted it into a Notepad++ document and placed it in the same directory as I2SOut.cpp which appeared to be the villain of the piece.

    Still no joy.

    I'm using a Wemos D1 R32 with a cnc shield v3, and by all accounts the Arduino IDE sees this board as an Esp32Dev.

    I'm not in the first flush of youth but not totally daft and this has me baffled.

    If someone can help me with this it would be wonderful, in fact if someone could provide a Hex file I could just flash the board with that would be like Christmas!

    Thanks for your patience, regards, Redeemed.

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2010
    Location
    USA
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: Trying to compile Grbl esp-32 Barton Dring and failing

    Have you tried the grbl_esp32 wiki?



  3. #3
    Member Redeemed's Avatar
    Join Date
    Oct 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Trying to compile Grbl esp-32 Barton Dring and failing

    Hi Kirk, fancy you not being on the Sainsmart FB group ;-)

    It turns out if you use VScode and PlatformIO it compiles like a charm!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Trying to compile Grbl esp-32 Barton Dring and failing

Trying to compile Grbl esp-32 Barton Dring and failing