NEED HELP / EZCAD2 not opening correctly


Results 1 to 1 of 1

Thread: NEED HELP / EZCAD2 not opening correctly

  1. #1
    Member alvinmanual's Avatar
    Join Date
    Apr 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default NEED HELP / EZCAD2 not opening correctly

    This AM when i opened the laptop running widows 7..

    the EZCAD app would not open... later when i realized it didn't not open I clicked on it again and got a message that it was already open.. the driver has been loaded along with the app and it was working till today..

    we reloaded and it is still doing the same..

    after we attempted to open app we found out if we unplug the usb cable it opens in demo mode..

    After closing the app and plugging in the USB cable the app does not open.....

    anyone else have this happen? how was it remedied?

    thank in advance.

    Similar Threads:
    Last edited by alvinmanual; 04-19-2021 at 05:43 PM.


  2. #2
    jhonmender's Avatar
    Join Date
    Dec 2023
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: NEED HELP / EZCAD2 not opening correctly

    I have the same problem started today. Any solution will be appreciated. Thanks in advance



  3. #3
    jhonmender's Avatar
    Join Date
    Dec 2023
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: NEED HELP / EZCAD2 not opening correctly

    I am using Windows 11, I'm thinking software update is the cause of this issue. Any thoughts?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

NEED HELP / EZCAD2 not opening correctly

NEED HELP / EZCAD2 not opening correctly