Now EzCad2 is discontinued is it time to investigate more into how it works ?


Results 1 to 1 of 1

Thread: Now EzCad2 is discontinued is it time to investigate more into how it works ?

  1. #1
    Member
    Join Date
    Aug 2009
    Location
    USA
    Posts
    253
    Downloads
    0
    Uploads
    0

    Default Now EzCad2 is discontinued is it time to investigate more into how it works ?

    Since EzCad2 is discontinued and EzCad3 is a pretty expensive retrofit of software and control board (at least) might be time to poke over how it works more .

    The XY2-100 for the galvo is easy enough, the Raycus 8 bit power + sync seems fairly straightforward since its tight timing either cpu+fpga/cpld+ram as a driver, or just keep figuring out the LMC1 interface. Maybe BJCZ will update/give out the EzCAD2 SDK instead.

    Similar Threads:


  2. #2
    Member ShortBill's Avatar
    Join Date
    Oct 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Now EzCad2 is discontinued is it time to investigate more into how it works ?

    Hi,
    Is anyone out there using EzCad3?
    Cheers.
    Bill.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Now EzCad2 is discontinued is it time to investigate more into how it works ?

Now EzCad2 is discontinued is it time to investigate more into how it works ?