Hi, I have SCANLAB IntelScanHead (galvo head system) who’s controlled by the RTC6 control board of the Scanlab working with an IPG Laser. Until a few days ago everything was working without errors, from one day to other the IntelScanHead just disappear. Scanlab uses iDrive technology for monitoring the RTC6 and IntelsScanHead, the iDrive recognizes the RTC6 without problem, but the IntelScanHead is not recognized. The connection between the galvo and RTC6 was lost from one day to other. On the Scanlab website and manual don´t say anything about this topic. Has anyone had this kind of problem?