Need Help! dll version does not match firmware version


Results 1 to 1 of 1

Thread: dll version does not match firmware version

  1. #1
    Member mgalea's Avatar
    Join Date
    Mar 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default dll version does not match firmware version

    I have a Chinese laser, and recently had to disconnect my 6525A controller. Everything was working fine, but now when I turn on the machine, the y movement seems fine, but the x movement moves, but whines and seems like a setting is incorrect. I ran the mpc05ver+m05.exe from the lasercut folder, and these are the results

    Version of DLL 4.1.2.2
    Version of Firmware 4.3.1.5
    Version of Hardware 4.3.1.1

    I am a novice at this, but not sure is I need to update my software, or the Firmware. I did reinstall the lasercut software, but it did not make any difference. Can someone tell me what I need to do to fix this issue, along with specific steps ?

    Thank you

    Similar Threads:
    Attached Thumbnails Attached Thumbnails dll version does not match firmware version-lasercut-settings-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

dll version does not match firmware version

dll version does not match firmware version

dll version does not match firmware version