Need Help! dll version does not match firmware version


Results 1 to 1 of 1

Thread: dll version does not match firmware version

  1. #1
    Member mgalea's Avatar
    Join Date
    Mar 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default dll version does not match firmware version

    I have a Chinese laser, and recently had to disconnect my 6525A controller. Everything was working fine, but now when I turn on the machine, the y movement seems fine, but the x movement moves, but whines and seems like a setting is incorrect. I ran the mpc05ver+m05.exe from the lasercut folder, and these are the results

    Version of DLL 4.1.2.2
    Version of Firmware 4.3.1.5
    Version of Hardware 4.3.1.1

    I am a novice at this, but not sure is I need to update my software, or the Firmware. I did reinstall the lasercut software, but it did not make any difference. Can someone tell me what I need to do to fix this issue, along with specific steps ?

    Thank you

    Similar Threads:
    Attached Thumbnails Attached Thumbnails dll version does not match firmware version-lasercut-settings-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

dll version does not match firmware version

dll version does not match firmware version