- Problem- Won't load new files
-
Member
Won't load new files
Have a AWC708c controller using lasercad v7.96.
Been having to erase any files in the controller in order to load a new file, small or large. Controller will show the file name as" unknown " and will not load any new files at all now.
Been doing the manual reset at the controller after deleting all the current files but now that doesn't even work.
To me it's a memory issue and preforming a reset is not clearing all
the memory.
Had a friend tell me a way to clear the memory but that was 2-3yrs ago and he as passed on now.
Anyone know how to correct this problem?
Rick
Similar Threads:
-
-
Member
Re: Won't load new files
Micheal
not sure a pix of the controller would help. Controller just shows normal screen as when starting up.
In the mean time I finally got the controller to take a SMALL file and was able to got to FILE then DELETE ALL FILES and that got it to take new files now. I only install one file at a time now, then do the "delete all files" to get me by till the proper solution is found.
I know there is away to completely reset the system but have lost that info.
Rick
- Problem- Won't load new files
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules