- Need Help!- Use co2 laser machine controll card to controll 30W fiber source
-
Member
Use co2 laser machine controll card to controll 30W fiber source
Hi all,
i have two 30W fiber laser source from marking machines, IPG and Raycus , i want to install the fiber dource on a small co2 laser cutting machine. The machine use a Ph card, similar to Ruida . Have a way to controll the fiber source using this card? I need only to controll fire laser and power. Or maybe use the card to fire laser and something like analogic simple circuit to set power manually
...
Similar Threads:
-
-
Member
Ruida controller doesn’t allow to operate with galvo scan head. So you can’t.
-
Re: Use co2 laser machine controll card to controll 30W fiber source
Hi, EZCAD2 seems to be the best solution.
- Need Help!- Use co2 laser machine controll card to controll 30W fiber source
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules