Fusion 360 to Planet-CNC MK3/4 controller POST PROCESSOR help


Results 1 to 4 of 4

Thread: Fusion 360 to Planet-CNC MK3/4 controller POST PROCESSOR help

  1. #1
    *Registered User* bstonterrier's Avatar
    Join Date
    Oct 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Red face Fusion 360 to Planet-CNC MK3/4 controller POST PROCESSOR help

    Newbie here trying to find a way to generate reliable G-Code from Fusion 360 to be loaded to my PLanet CNC MK/3/4 controller. I have tried about 15 different Post Processors but either they run into multiple errors are generate G-Code that has a multitude of manual corrections that must be made. Anyone out there have a solution?



  2. #2
    *Registered User* jk40001's Avatar
    Join Date
    Nov 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Fusion 360 to Planet-CNC MK3/4 controller POST PROCESSOR help

    deleted

    Last edited by jk40001; 11-24-2018 at 09:28 PM.


  3. #3
    Activation process
    Join Date
    Oct 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Fusion 360 to Planet-CNC MK3/4 controller POST PROCESSOR help

    I am also looking for a post processor for the same setup. Did you find a good one? Please let me know.



  4. #4
    Member
    Join Date
    Feb 2011
    Location
    Slowenia
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Fusion 360 to Planet-CNC MK3/4 controller POST PROCESSOR help

    I am using EMC2-Lnux pp and works ok until the zero Z axes is on top of the object, now I have modified the PP to stop writing G28&G53 codes. Only attrention is nedded to put the Z axe higher from object.
    Still this is not job done, because I moastly use Z on table (using vaccum table), and need for aditional futures like start vacc, cooling, etc.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fusion 360 to Planet-CNC MK3/4 controller POST PROCESSOR help

Fusion 360 to Planet-CNC MK3/4 controller POST PROCESSOR help