Need Help! laser firing when traveling to origin


Results 1 to 3 of 3

Thread: laser firing when traveling to origin

  1. #1
    Registered
    Join Date
    Mar 2018
    Location
    Australia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default laser firing when traveling to origin

    Hi. I just change controllers and the laser is firing when traveling to its origin. It happens when I turn on the machine and when its finished cutting a job. It also wont fire at 21% but is full power at 22%. It did that with the last controller as well. Any ideas
    \Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2012
    Location
    U.S.A.
    Posts
    43
    Downloads
    0
    Uploads
    0

    Default Re: laser firing when traveling to origin

    what controller are you using and software?



  3. #3
    Member
    Join Date
    Apr 2006
    Location
    usa
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: laser firing when traveling to origin

    Hello,

    I have seen this a few times...

    The problem is much more likely to be in the logic portion of your laser power supply. The best and safest way to solve the problem is to replace the laser power supply.

    It all depends on how the controller and laser power supply are wired... but you should confirm the wires from Laser-On are connected to theL pin of the power supply. Then make sure the software is configured for Low signal triggering.

    Make sure the Analog signal is connected from the controller AN1 to the “IN” pin of the laser power supply.

    Please take time to tell us what solved the problems.

    Ray Scott
    Rabbit Laser USA



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

laser firing when traveling to origin

laser firing when traveling to origin